Deep Groove Bearings

Contact Now

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds
Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

260mm x 400mm x 44mm FAG 16052-m-fag Deep Groove Bearings

1.00 mm 6300 rpm
53900 N 4800 rpm

260mm x 400mm x 44mm FAG 16052-fag Deep Groove Bearings

28.575 mm 62.706 mm
47.625 mm 149.225 mm

260mm x 400mm x 44mm FAG 16052-c3-fag Deep Groove Bearings

160 mm 0.15
e7 45 N/mm²

240mm x 360mm x 37mm FAG 16048-ma-c3-fag Deep Groove Bearings

308 mm 1028 mm
260 r/min 0

240mm x 360mm x 37mm FAG 16048-c3-fag Deep Groove Bearings

66.70 mm 150.0000 mm
153000 N 125000 N

240mm x 360mm x 37mm FAG 16048-ma-fag Deep Groove Bearings

40.922 mm 107 kN
231.775 mm 23026 CCK/W33

240mm x 360mm x 37mm FAG 16048-fag Deep Groove Bearings

75.00 mm 403000 N
1.00 mm 3.00 mm

170mm x 260mm x 28mm FAG 16034-c3-fag Deep Groove Bearings

20 mm 30.4 kN
52 mm 1.5 mm

170mm x 260mm x 28mm FAG 16034-fag Deep Groove Bearings

62.0000 mm 0.60 mm
27600 N 23600 N

220mm x 340mm x 37mm FAG 16044-m-c3-fag Deep Groove Bearings

82.55 mm SAF 526
406.4 mm SNW 26x4.5/16

220mm x 340mm x 37mm FAG 16044-m-fag Deep Groove Bearings

0.8 80.9 mm
114 kN 13.2 kN

220mm x 340mm x 37mm FAG 16044-c3-fag Deep Groove Bearings

20.2 kg 92.5 kN
55.6 kN LOR 43
1/11